Centrifugal Compressor - IPP# 225213

Type: Compressor

Subtype: Centrifugal

Manufacturer: Ingersoll Rand

Model: Centac C140-MX3-2SH

Condition: Used

Inlet Pressure: 0.98 bar (14.2 psi)

Discharge Pressure: 10.4 bar (150.7 psi)

high pressure, unitized and skid mountedmultistage air compressor systemoil free designhigh air temperature to trip setting (interstage) 46 degrees Cdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min

Flow Rate: 7,200 m3/h (4,250 CFM). Oil Free: Yes.

Type: Compressor

Subtype: Centrifugal

Manufacturer: Ingersoll Rand

Model: Centac C140-MX3-2SH

Condition: Used

Discharge Pressure: 10.4 bar (150.7 psi)

Flow Rate: 7,200 m3/h (4,250 CFM)

high pressure, unitized and skid mountedmultistage air compressor systemoil free designdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min

Type: Compressor

Subtype: Centrifugal

Manufacturer: Ingersoll Rand

Model: 1ACII26A/E2

Condition: Used

Material: Carbon Steel

Compressor Type: Centrifugal

Inlet Pressure: 0.97 bar (14.1 psi)

Centac II air compressor Water cooled with both Intercooler & after cooler Compressor inlet 6" discharge 3" cooling water inlets and outlests are 2" Skid mounted with control panel and oil pump 2 pole 3 phase constant speed AC drive motor rated for 129 full load amps With carbon steel air reciever 600 gallon vertical mount 6" inlets and outlets, 1.5" presure releif valve, and 15" eliptical hand way.

Discharge Pressure: 7.6 bar (110 psi). Flow Rate: 4,600 m3/h (2,700 CFM). Inlet Diameter: 152.4 mm (6 in). Speed (RPM): 3,575.

Type: Compressor

Subtype: Centrifugal

Manufacturer: Ingersoll Rand

Model: IRN100H-22

Condition: Used

Material: Carbon Steel

Compressor Type: Centrifugal

Inlet Pressure: 0.97 bar (14 psi)

Discharge Pressure: 10 bar (145 psi). Flow Rate: 680 m3/h (400 CFM).