Stainless Steel Other Glatt GRG 200 Spheronizer Dryer-Fluid Bed - IPP# 208486

Type: Dryer-Fluid Bed

Manufacturer: Glatt

Model: GRG 200 Spheronizer

Condition: Used

Material: Stainless Steel Other

Capacity: 200 L (52.8 gallons)

Air Flow Rate: 6,000 m3/h (3,550 CFM)

Fluid Bed Dryer Spheronizer perforated bed electrical motor Motor: 3 phase type KPER200L4-TWS

Pressure: 0.5 bar (7.3 psi). Temperature: 60 °C (140 °F). Bowl Diameter: 1,450 mm (57.1 in). Bowl Height: 400 mm (15.7 in). Particle Coating Ability: Polymeric coating to spheres containing or layered with drugs, Layering spheres with drugs..

Type: Dryer-Fluid Bed

Manufacturer: Glatt

Model: TFO 150

Condition: Used

Material: Stainless Steel Other

Capacity: 500 L (132.1 gallons)

Orientation: Vertical

Air circulation fan is 12,5 KW, 50/220/380 Volt @ 3000rpm.

Type: Dryer-Fluid Bed

Manufacturer: Glatt

Model: TFO 300-400

Condition: Used

Material: Stainless Steel 304

Capacity: 700 L (184.9 gallons)

Air Flow Rate: 14,000 m3/h (8,250 CFM)

load weight 300 kg special Vitamin-A-Pulver, with cyclones heater and cooler and de-dusting system Filter housing is 1.6m diamter, 2.5mm thick, with (59) bags, at the bottom of the filter housing is a tapered section that has a buterfly valve controling flow into the hopper bottom. Hopper bottom is 304 stainless steel (1.4301), 1190 mm diameter x 640 mm straight side with a 660 mm deep cone. Bottom hopper mounted on 4 legs with wheels. With seperate heating cooling box, rated - heater rated 320,000 Kcal/hr @ 5 atu, air cooler rated 400,000 kcal/hr @ 0/4 degrees c. Main fan is rated 14,000 CuM/Hr, 2900 upm, driven by a 35.8 KW, 3 phase 50 cycle, ExeG3 rated motor

Pressure: 5 bar (72.5 psi). Bowl Diameter: 1,200 mm (46.9 in). Bowl Height: 1,300 mm (51.2 in). Orientation: Vertical.

Type: Dryer-Fluid Bed

Manufacturer: Glatt

Model: TFO 300-400

Condition: Used

Material: Stainless Steel 304

Capacity: 700 L (184.9 gallons)

Air Flow Rate: 14,000 m3/h (8,250 CFM)

300 kg special Vitamin-A-Pulver with cyclones heater and cooler and de-dusting system Filter housing is 1600 mm diamter, 2.5mm thick with (59) bags at the bottom of the filter housing is a tapered section that has a buterfly valve controling flow into the container bottom Hopper bottom is 304 stainless steel (1.4301), 1190 mm diameter x 640 mm straight side with a 660 mm deep cone with a 660 mm deep cone. With separate heating cooling box, rated - heater rated 320,000 Kcal/hr @ 5 atu, air cooler rated 400,000 kcal/hr @ 0/4 degrees c. Main fan is rated 14,000 CuM/Hr, 2900 upm, driven by a 35.8 KW, 3 phase 50 cycle, ExeG3 rated motor.

Pressure: 5 bar (72.5 psi). Bowl Diameter: 1,200 mm (46.9 in). Bowl Height: 1,300 mm (51.2 in). Orientation: Vertical.